ARpiCADE Forums

bobojijio

Bubbak, I noticed the same thing as well. When I log in as the user 'pi' via SSH it executes the login script which launches attract mode and appears to hold up the command prompt. You should notice that if you cancel out of attract mode on the console session that you will immediately receive a com...

bobojijio

The observed issue occurs with "hdmi_mode=1" enabled in config.txt. The observed issue does NOT occur with "hdmi_mode=6" or "hdmi_mode=8". In a vertical cab with vertical game roms, I prefer mode 1 as it shows everything full screen. Everything appears to work in isolation; I think it's a combinatio...

bobojijio

I'm using a GBS-8200 ( https://www.amazon.com/gp/product/B00F1YQIVK/ref=od_aui_detailpages00?ie=UTF8&psc=1 ). I have the Pi set to display at the lowest resolution it'll go. I'll post the actual config line when I get back to work, but I can tell you that the line that is on the bottom of the block ...

bobojijio

I have a 6-in-1 switcher as well in the cab which is the reason for the CGA-to-VGA adapter, otherwise I would plug directly into the DAC directly as a more permanent solution. I left the monitor plugged into the DAC for the last day and haven't had any issues but as soon as I feed it through the JAM...

bobojijio

Hardware: RaspberryJamma, Pi 3b+ Running: Arpicade 3.82 When using all of the (HSS) purchased hardware the screen initially looks fine but after about 3-5 minutes the picture washes out/fades to a red color (see attached). Removing and reseating the VGA end of the HDMI-to-VGA adapter into the Raspbe...

Search found 5 matches

Re: HOWTO: Enable Wi-Fi and SFTP access to transfer your ROMs via a Windows PC using WinSCP!

Re: Display Washes Out After a Couple Minutes

Re: Display Washes Out After a Couple Minutes

Re: Display Washes Out After a Couple Minutes

Display Washes Out After a Couple Minutes