Search found 13 matches
- Thu May 27, 2021 6:25 pm
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
I was getting 5.1 with the board turned on. The Pi is still not booting even with the edge measuring 5.1v. After talking to Joe over at HSS yesterday - we basically found for some weird reason if I plug in a power cable to the Pi everything works as expected. It's almost as if the 5v isn't doing muc...
- Wed May 26, 2021 3:42 pm
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
Also - when you said "f you only have one 5v wire from the harness to the power supply you may want to add some more wire for 5v and GND to your harness." I have seen that on a couple of other posts. How would I go about doing that exactly? That may very well be my problem. I was able to test the vo...
- Tue May 25, 2021 4:03 am
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
I was able to hook up the Pi to an HDMI monitor while it was powered by the wall plug and I did get the Arpicade logo. So this is definitely the issue.
- Tue May 25, 2021 4:02 am
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
Here’s a link to a pic of my current power supply setup:
http://bryandease.com/uploads/IMG_7949.jpg
http://bryandease.com/uploads/IMG_7948.jpg
http://bryandease.com/uploads/IMG_7949.jpg
http://bryandease.com/uploads/IMG_7948.jpg
- Tue May 25, 2021 2:52 am
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
So while you were typing that I tested the power directly with a standard micro USB cable and an in-wall usb power supply. The red light came on and immediately I got the green activity light which I assume means everything was booting as normal. Now I guess I have to determine why I’m not getting t...
- Tue May 25, 2021 2:30 am
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
The only change I made to 3.X was changing the hdmi mode to 1. I don’t have a way to measure the output at this point from the power supply. I had just assumed that the power draw would be about the same as the Pandora.
- Tue May 25, 2021 2:07 am
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
I ordered it as hi res. Made sure to get the LCD/LED option pre-installed. I didn’t make any changes to it.
- Tue May 25, 2021 1:54 am
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
Thanks so much for your patience on this. My exact routine when the entire kit came in the mail was this: 1 - set the dip switches for 6 button 2 - unplugged the VGA and Jamma cable from the Pandora’s box 3 - plugged the Jamma and VGA into the ArPi 4 - turned on the power to the cabinet That’s basic...
- Mon May 24, 2021 5:25 pm
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
I made a fresh image of 3.X and still the same thing happens.
- Mon May 24, 2021 3:08 am
- Forum: Potential buyer and newbie area
- Topic: Just purchased Arpicade and nothing comes on at all
- Replies: 21
- Views: 9214
Re: Just purchased Arpicade and nothing comes on at all
Ah ok. I was just going by the downloads page on the website. I’ll try that version and see if that gets me anywhere. Thanks.