ARpiCADE Forums

Hard to say what went wrong there. You should find the issue before plugging more boards into the cab, else you're at risk of damaging some more boards. Were you careful assembing the boards? I've seen people misalign the four player add-on board to the 40 pin header on the RaspeberryJAMMA before wh...

By default the first mouse is part of player 1 input binds in Retro Arch, it comes down to the individual emulator cores if they use analog or not. Unfortunately I've sent you down the garden path on this one... having done some more research the RA core version of Stella (the 2600 emulator) doesn't...

It could be worth updating to 3.X as well, although you would have to re-image your SD card to do so (or use another SD card). 3.X.1 is the latest Pi3 version, but the .1 part is an update applied to 3.X which has to be installed first. It's been a while so I can't remember the changes offhand but i...

Thanks for posting that, I got a kick out of the old web design as much as the old MAME setup. If you were up to date at the time your MAME version was probably not much newer than what MAME4All is based on (0.037 was from 2000, I think). Finding a Snow Bros cab at Cashies is different, I've never s...

I haven't actually tried it but it should be possible, assuming the emulator supports it (or at least the RA core version of the emulator). It's likely the settings can be found in the Retro Arch menus (F1 while the game is running), possibly in core specific input settings and changing the emulated...

You will need to change theinput settings for each emulator (that you're using) and Attract-Mode (the menu) to suit your custom button mapping. You'l need to plug in a keyboard before doing so but it can all be done on your cab. Once the Attract-Mode game select menu has loaded press 'tab' to open i...

Sure, you can just reconfigure the controls in the emulators and menus. In fact, if you also use the four player adaptor you could also do p2 as p3 and not change any wiring in your cab. Oddly, I have occasionally recommended wiring 4 player cabs 3,1,2,4 to avoid having to do this while mixing 2 and...

Not sure which version of ARpiCADE you're running so it's tricky to know for sure... can you post the contents of /boot/launchers/resSwitch.sh for me? I should be able to figure out whats going on once I've seen it.

I won't post a full run.sh file because I don't know which version of ARpiCADE you have to match it to avoid further problems... essentially you want to find one of these lines (what you have will depend on the ARpiCADE version) in run.sh: bash /boot/firmware/launchers/ScanRoms_V007.sh allnoporn >/d...

No problem, that makes it nice and easy. All you need to do is change th eline that says hdmi_mode=6 to hdmi_mode=1

You will also likely want to comment out or remove the overscan_left=33 and overscan_right=32 lines as your high res monitor probably doesn't have an issue with overscan.

Search found 1860 matches

Re: Blown fuse & over-amperage draw

Re: spintrak on atari 2600 emulator

Re: spintrak on atari 2600 emulator

Re: My 1st MAME cabinet

Re: spintrak on atari 2600 emulator

Re: Can P2 be played as P1?

Re: Can P2 be played as P1?

Re: need help changing my sd card from cga to vga

Re: Disable rom scanner on start-up

Re: need help changing my sd card from cga to vga