Page 3 of 3

Re: Just purchased Arpicade and nothing comes on at all

Posted: Thu May 27, 2021 6:25 pm
by theDeezer
I was getting 5.1 with the board turned on. The Pi is still not booting even with the edge measuring 5.1v. After talking to Joe over at HSS yesterday - we basically found for some weird reason if I plug in a power cable to the Pi everything works as expected. It's almost as if the 5v isn't doing much at all to power the board. For now my dirty solution is just not relying on the 5v from the harness and powering the Pi from the wall. Everything seems to be working as expected this way.

Re: Just purchased Arpicade and nothing comes on at all

Posted: Sat Jun 26, 2021 6:19 am
by Slam_Bradley
theDeezer wrote:
Thu May 27, 2021 6:25 pm
we basically found for some weird reason if I plug in a power cable to the Pi everything works as expected. It's almost as if the 5v isn't doing much at all to power the board. For now my dirty solution is just not relying on the 5v from the harness and powering the Pi from the wall. Everything seems to be working as expected this way.
For some reason when I first got mine I thought I always had to do this myself as well. I just unplugged mine though after a lot of other tinkering and it works fine off the 5v from the JAMMA. :oops: