ARpiCADE_5 beta - for Pi4 or Pi5.

Latest on ARpiCADE new releases, release notes, and history of previous versions.

Moderator: dee2eR

ArsInvictus
Community Member
Community Member
Posts: 7
Joined: Mon Aug 16, 2021 8:58 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by ArsInvictus » Mon Feb 19, 2024 4:26 am

No problem, I probably won't have time to try it until tomorrow evening anyway, so take your time.

Tapper
Super Contributor
Super Contributor
Posts: 51
Joined: Sun Mar 17, 2019 9:00 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by Tapper » Fri Feb 23, 2024 7:57 pm

I still have an Arpicade with a RP3+ in my cabinet.

Haven't been keeping up, but if I want to upgrade to a Pi5, is it as simple as switching the Pi3+ out for the new one? I know it also needs a cooler. Anything else to be aware of?

Thank you.

dee2eR
Inventor
Inventor
Posts: 1867
Joined: Tue Aug 22, 2017 2:07 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by dee2eR » Sat Feb 24, 2024 3:07 am

You will need a HDMI to micro HDMI adaptor to suit the micro HDMI on the Pi5. I recommend using one with a short cable rather than the solid type as the solid type can get in the way of the DAC mounting due to its size.

Assuming your cab power wiring is fine and your RaspberryJAMMA has the 2.5A fuse already, you won't need anything else. Just swap out the RPi (and software).

Olaf
Community Member
Community Member
Posts: 11
Joined: Tue Apr 20, 2021 5:50 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by Olaf » Sat Feb 24, 2024 5:25 pm

@dee2eR
The 2.5A fuse you installed is what color because I've had my circuit board for several years.
I cannot read the data on the backup, it is unreadable.

dee2eR
Inventor
Inventor
Posts: 1867
Joined: Tue Aug 22, 2017 2:07 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by dee2eR » Sat Feb 24, 2024 11:56 pm

The 2.5A ones I use a the moment are greenish. The 2A and 1A used prior to that both look identical and beige-ish (a 2A may well do, 1A definately isn't going to work well with Pi5).

Olaf
Community Member
Community Member
Posts: 11
Joined: Tue Apr 20, 2021 5:50 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by Olaf » Sun Feb 25, 2024 10:51 pm

Ok thanks for the Answer.
I'll change the fuse and see if it works better.

dee2eR
Inventor
Inventor
Posts: 1867
Joined: Tue Aug 22, 2017 2:07 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by dee2eR » Mon Feb 26, 2024 7:36 am

What is actually happening with it?

Olaf
Community Member
Community Member
Posts: 11
Joined: Tue Apr 20, 2021 5:50 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by Olaf » Tue Feb 27, 2024 4:49 pm

After a long time of testing, I no longer get a picture.

dee2eR
Inventor
Inventor
Posts: 1867
Joined: Tue Aug 22, 2017 2:07 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by dee2eR » Wed Feb 28, 2024 7:23 am

Is that after returning from a game after running a bunch of different games? If so I've seen similar, I think it's a bug to do with Attract-Modes resfix plugin, up or down on the joystick should bring the menu up again if it's sitting at a blackscreen. Not using that plugin (you can turn it off in attract-modes menus) also works but then sometimes the picture is setup wrong returning to the menu after the resolution has changed for a game (even though it has also changed back to the original res, if it happens launch another game and return to the menu and usually it's good again)... Unfortunately I don't have a proper fix for it at the moment, need to figure out why it happens first.

If that's not what you're talking about let me know. All the feedback helps, thanks.

Olaf
Community Member
Community Member
Posts: 11
Joined: Tue Apr 20, 2021 5:50 pm

Re: ARpiCADE_5 beta - for Pi4 or Pi5.

Post by Olaf » Sun Mar 03, 2024 1:41 pm

No, the problem for me was after a restart to try out the ROMs, I think it has something to do with the backup. After a long break (without power) I get a picture again.
I will also try what you wrote but I'm on vacation at the moment.

Post Reply