ARpiCADE 3.82 Release!
Moderator: dee2eR
- cool_factor
- Legendary Contributor
- Posts: 332
- Joined: Tue Sep 26, 2017 10:55 am
- Location: Fort Worth TX
Re: ARpiCADE 3.82 Release!
It's just a decal of a quarter you stick on the switch.
Re: ARpiCADE 3.82 Release!
perfect, thanks
-
- Community Member
- Posts: 24
- Joined: Fri Apr 13, 2018 2:46 am
Re: ARpiCADE 3.82 Release!
I want to add xexex and undercover cops alpha renewel any idea which emulator to use so i know what romset to use?
Re: ARpiCADE 3.82 Release!
I'm not sure but my standard advice is try 172 and 192 first, followed by advmame and the others. If you find good emulators for them please post it for others too.
Re: ARpiCADE 3.82 Release!
Hi, have a few questions please as i am a new to this. I upgraded from 3.72 to 3.82 buy using imaging software to copy over update to sd card. Then when i booted it did a scan for the roms, i take it I don't need to update anything else by way of the service menu in Attract-Mode.
I have noticed there is no sound in space invaders 1 or 2. Also Super Punchout does not work properly. I see there is a rom for punchout for mame 0.184, could i put this into any other mame folder like 078, also i don't see a folder called advmame that was mention in this thread, sorry for all the questions.
Thanks
I have noticed there is no sound in space invaders 1 or 2. Also Super Punchout does not work properly. I see there is a rom for punchout for mame 0.184, could i put this into any other mame folder like 078, also i don't see a folder called advmame that was mention in this thread, sorry for all the questions.
Thanks
Re: ARpiCADE 3.82 Release!
Space invaders is probably missing the sound samples in /boot/sample/ (I thought they were included but just checked my own build and I don't have them there either.
/boot/roms/mame-106 folder is the rom folder for AdvMAME. (Advance MAME uses the MAME 0.106 set)
Punchout (and other multi screen games) will vary from emulator to emulator how they handle the multiple screens. I tried PC10 recently and could only see the top screen (even though the gameplay was on the lower screen). Is that the issue you were having with Punchout? If it's something else I can look into it further.
/boot/roms/mame-106 folder is the rom folder for AdvMAME. (Advance MAME uses the MAME 0.106 set)
Punchout (and other multi screen games) will vary from emulator to emulator how they handle the multiple screens. I tried PC10 recently and could only see the top screen (even though the gameplay was on the lower screen). Is that the issue you were having with Punchout? If it's something else I can look into it further.
Re: ARpiCADE 3.82 Release!
Hi, thank you for the quick response and this great product.
That is the same problem I am having with super punchout. I will look into punch out the first game and test the rom over the weekend.
That is the same problem I am having with super punchout. I will look into punch out the first game and test the rom over the weekend.
-
- Community Member
- Posts: 6
- Joined: Sun Apr 15, 2018 2:57 pm
Re: ARpiCADE 3.82 Release!
Hi, i have odd problem and maybe somebody knows a solution.
I upgraded from my raspberry 3b to the 3b+, since then my NEO GEO fba games run at 59.2 fps.
That makes the screen my stutter and the audio "warbles".
Switching audio sync on or off doesn't changes the issue.
The estimated screen refresh rate differs from 59.179–59.183
Setting a different refresh rate does not change that.
Thanks in advance for any suggestions to solve the problem
I upgraded from my raspberry 3b to the 3b+, since then my NEO GEO fba games run at 59.2 fps.
That makes the screen my stutter and the audio "warbles".
Switching audio sync on or off doesn't changes the issue.
The estimated screen refresh rate differs from 59.179–59.183
Setting a different refresh rate does not change that.
Thanks in advance for any suggestions to solve the problem
Re: ARpiCADE 3.82 Release!
Audio sync to ON should fix it, did you exit and reload the game after changing the setting? (not sure if that setting can be changed on the fly)
Earlier in this thread (page 2 or 3) others posted that all they needed was audio sync ON.
Earlier in this thread (page 2 or 3) others posted that all they needed was audio sync ON.
Re: ARpiCADE 3.82 Release!
I just noticed the game bubble bobble lost cave is blank on the games list, when I click the blank area the game will boot, any suggestions please how to show the title in the games list please