Page 1 of 1
Raspberryjamma kicker harness
Posted: Sat Mar 02, 2019 7:21 pm
by Jasonwm64
Anyone know what the red, black and green wires hook to?
Re: Raspberryjamma kicker harness
Posted: Sun Mar 03, 2019 9:25 am
by dee2eR
Hard to say, the wire colours arn't the same for everyone. Not sure if HSS is doing a colour coded loom or something though... The pinout for the RaspberryJAMMA kick harness can be seen in this picture:
https://drive.google.com/open?id=0B6UOe ... i1idTI1cHc
If that's not the wires you're asking about, I'm not sure. Maybe post a photo of the wires in question if you can (unless it's just the kick harness).
Hope that helps.
Re: Raspberryjamma kicker harness
Posted: Sun Mar 03, 2019 7:05 pm
by Jasonwm64
- Kik harness
- 20190303_105845.jpg (255.93 KiB) Viewed 5135 times
This is the one that came with my kit. I have a red,green and a black wire I'm not sure what to do with. This harness plugs into the raspberry jamma. The red and green has a spade connector on one side and nothing on the other. The black has lots of spades in daisy chain on one side and nothing on the other. I would assume the black blank side I tie into the other button grounds and have no clue about the green and red. Sorry I tried to take some pictures but I cant seem to get my files small enough.
Re: Raspberryjamma kicker harness
Posted: Thu May 16, 2019 6:50 am
by MarkOZLAD
If you want somewhere to upload the files try joining
https://klovimg.com/
Once uploaded it will provide embed codes. Use the "BB Code Medium Linked" embed codes for each photo and paste them into a post on this forum.