Sooooo. Made progress. It’s in. Starts. Loads all games. Sounds great. But.
The 4p adapter. The stock wire harness won’t plug into the Konami 3/4p pins.
Do I need an adapter/harness converter? (Probably it would seem…..).
Sorry for the endless questions. Thanks again!
Using stock Simpsons harness?
Moderator: dee2eR
-
TheHandlebarGamer
- Community Member
- Posts: 9
- Joined: Sat Jul 16, 2022 4:38 am
Re: Using stock Simpsons harness?
Why doesn't the 3 and 4 player harness' fit? It should be able to work with the standard wiring, at least, it was intended to have the same pinout, pitch etc.
-
TheHandlebarGamer
- Community Member
- Posts: 9
- Joined: Sat Jul 16, 2022 4:38 am
Re: Using stock Simpsons harness?
Seems like the lip on the 4p adapter for the ports need to be trimmed.
A buddy of mine had to do the same.
So. I did. Plugged them in. They are working!
The edge of the connector doesn’t mate up with the stock simpsons cab it seems. I checked the pin outs before attempting. Pin 15 was marked on the stock harness and 4p board.
Testing now.
A buddy of mine had to do the same.
So. I did. Plugged them in. They are working!
The edge of the connector doesn’t mate up with the stock simpsons cab it seems. I checked the pin outs before attempting. Pin 15 was marked on the stock harness and 4p board.
Testing now.
