I was thinking about it...
How hard would it be to convert a RaspberryJAMMA I/O board to work with a PC? Correct me if I am wrong, but for video, all that would be needed is the HDMI to run to the PC's HDMI out? Right? Then the controls ... a little board with connectors would have to be made to plug in to the ribbon cable spot on the i/o board to wire up... but that would have to go to a USB or PS2 connector on the PC... right?
A NEW Product?
Moderator: dee2eR
-
FrizzleFried
- Legendary Contributor
- Posts: 328
- Joined: Sat Nov 25, 2017 5:35 pm
- Location: Idaho
- Contact:
A NEW Product?
Visit my arcade blog ... www.idahogaragecade.com (Updated: 10/28/21)
Re: A NEW Product?
It could be done. That would effectively turn the RaspberryJAMMA into a J-PAC style device... All you would need is a mini-PAC, or 'zero delay' encoder, or similar and carefully jumper wire them into the ribbon cable header on the RJ. I could probably build one out of parts I have already...
I suspect it would only make sense to do on a level of 'I have these bits lying around can I do this?'.
I suspect it would only make sense to do on a level of 'I have these bits lying around can I do this?'.
