Happ spinner?

Questions about the RaspberryJAMMA adapter.

Moderator: dee2eR

Post Reply
Mmezo
Community Member
Community Member
Posts: 3
Joined: Sat Jan 12, 2019 9:11 pm

Happ spinner?

Post by Mmezo » Sat Jan 19, 2019 6:16 pm

Is there any way to hook up a Happ spinner? I don't seem to see the wiring connector I would expect in the wiring harness, any advice?

dee2eR
Inventor
Inventor
Posts: 1857
Joined: Tue Aug 22, 2017 2:07 pm

Re: Happ spinner?

Post by dee2eR » Sat Jan 19, 2019 10:44 pm

You will need to use a optical to USB adaptor for spinners (or trackballs). I use an Opti-Wiz with my trackball, there's others that should work fine too like the Opti-PAC etc.

Bubbak
Contributing Member
Contributing Member
Posts: 29
Joined: Sat Nov 25, 2017 3:35 pm

Re: Happ spinner?

Post by Bubbak » Sun Jan 20, 2019 1:14 pm

I hooked up a Groovy Game Gear Turbo Twist 2 spinner USB to the Pi. I also have a USB trackball hooked up to the Pi as well. Only issue I have with this set up is that my TB and spinner are close and I've bumped the spinner while using the TB. GGG has a board that will help prevent that, but I probably won't bother with it.

Mmezo
Community Member
Community Member
Posts: 3
Joined: Sat Jan 12, 2019 9:11 pm

Re: Happ spinner?

Post by Mmezo » Sun Jan 20, 2019 8:03 pm

Got it, thanks I think I'll skip it for this project. I have a USB adapter for another it I'll use it with, it had the correct connector.

I appreciate the help!

flyingfistofbudha
Contributing Member
Contributing Member
Posts: 26
Joined: Mon Sep 13, 2021 10:52 am

Re: Happ spinner?

Post by flyingfistofbudha » Fri Aug 18, 2023 3:41 am

Any one used a spinner with arpicade yet ?

If so which one would be best to use ?

I like arknoid & ghox

Whilst I’m at it I have rotary sticks
Can I use these also .. nothing quite like
Guerrilla War with rotary

User avatar
cool_factor
Legendary Contributor
Legendary Contributor
Posts: 332
Joined: Tue Sep 26, 2017 10:55 am
Location: Fort Worth TX

Re: Happ spinner?

Post by cool_factor » Fri Aug 18, 2023 5:30 pm

i use the ultimarc spinners with zero issues. I have an 8 way rotary for frontline and wild western so your rotary should work. just have to figure out the settings in mame to use.

dee2eR
Inventor
Inventor
Posts: 1857
Joined: Tue Aug 22, 2017 2:07 pm

Re: Happ spinner?

Post by dee2eR » Sat Aug 19, 2023 3:30 am

I can recommend OptiWiz as a way to convert standard arcade trackballs or spinners to USB.

Haven't actually tried any dedicated USB spinners though.

Post Reply