I am experiencing a problem when using the ARpiCADE with my Nanao MS8 26SU. It is mostly only visible in the menu screens and certain games. Its only on the left side of the screen running vertically. It doesn't happen with PCBs which im being told have superior RGP/Jamma Output. Ive attached some photos. Let me know if you can think of a solution or fi anyone else has seen this problem.
Thank you!
Raster Lines?
Moderator: dee2eR
Raster Lines?
- Attachments
-
- 20210402_122548.jpg (149.74 KiB) Viewed 2174 times
-
- 20210402_111331.jpg (177.41 KiB) Viewed 2174 times
-
- 169478633_10159540891845625_7475140820696751967_n.jpg (84.39 KiB) Viewed 2174 times
Re: Raster Lines?
Haven't seen that before (unless it's just an adjustment needed). Looks like the whole picture is a bit to the left and folding over the left side slightly, you can see a black edge down the right side that suggests the whole image is to the left.. My first instinct would be to adjust the picture position slightly on the monitor chassis, it may be all it needs. Have you tried adjusting the picture position, maybe the size too? If it's adjusted to a different board having the picture not be perfectly lined up makes sense.
Not sure who/why you're being told JAMMA boards have superior RGB abilities... brighter on some boards maybe but shouldn't really be any different picture quality wise. It is possible the image isn't placed exactly the same on screen but all the quality should be there.
There are a lot of different resolutions in use compared to a dedicated board though, especially in the last couple of releases of ARpiCADE. What version are you using? As you say the issue only happens in menu and some games I'm guessing it's either one or some resolutions that are lining up a bit differently or a monitor adjustment (as mentioned above). The more info you can give me the better I can help.
Not sure who/why you're being told JAMMA boards have superior RGB abilities... brighter on some boards maybe but shouldn't really be any different picture quality wise. It is possible the image isn't placed exactly the same on screen but all the quality should be there.
There are a lot of different resolutions in use compared to a dedicated board though, especially in the last couple of releases of ARpiCADE. What version are you using? As you say the issue only happens in menu and some games I'm guessing it's either one or some resolutions that are lining up a bit differently or a monitor adjustment (as mentioned above). The more info you can give me the better I can help.
Re: Raster Lines?
I just ordered this about a week ago. Not sure what version it is I will take a look at the board.
https://highscoresave.com/arpicade-jamma-adapter/
https://highscoresave.com/arpicade-jamma-adapter/