I've recently updated to ARpiCADE version 3.X and I am finding games that used to work on previous versions of ARpiCADE don't now due to a resolution issue according to the error screen that comes up on my monitor.
Most games work fine but games like Joust, Moon Patrol and Jungle King just come up with blank screens and some message on the monitor stating the monitor doesn't support that resolution. I can hear the games through the audio but no controls respond like escape or tab.
The monitor is a Dell P1914S orientated horizontally in my cocktail table, it's native resolution is 1280 x 1024 @ 60hz. It's aspect ration is 5:4.
My settings in the config.txt are hdmi_group=1 and hdmi_mode=1.
Do I need to play around with these settings to fix my problem or is the problem to do within Advance Mame and I need to change settings there?
Can someone point me in the right direction?
Thanks.
Some game resolutions not supported by my monitor
Moderator: dee2eR
Re: Some game resolutions not supported by my monitor
I have a feeling I should be using hdmi_group=2 and hdmi_mode=35.
So I've tried that and I've also included this in resSwitch.sh
So I've tried that and I've also included this in resSwitch.sh
But unfortunately that didn't work.if [ $hdmimode == hdmi_mode=1 ] || [ $hdmimode == hdmi_mode=2 ] || [ $hdmimode == hdmi_mode=3 ] || [ $hdmimode == hdmi_mode=4 ] || [ $hdmimode == hdmi_mode=16 ] || [ $hdmimode == hdmi_mode=35 ] || [ $2 == dryrun ]; then
Re: Some game resolutions not supported by my monitor
That's a headscratcher. It shouldn't be changing resolutions at all running in high res mode (hdmi_group=1 and hdmi_mode=1). Did you make sure the default low res settings were commented out? (that could possibly trip up the logic in the resSwitch - but I'm not sure that's what is happening)
The fact that no input works is also a bit confusing. I'll have to look into it for you tomorrow and see if I can figure anything out.
The fact that no input works is also a bit confusing. I'll have to look into it for you tomorrow and see if I can figure anything out.
Re: Some game resolutions not supported by my monitor
By default low res settings were commented out, are you referring to this part?
## Return to original boot resololution
## only works with 240p and 480i
# if [ $1 == defaultres ]; then
# echo $hdmitiming
# ##Return to 240p # resolution to
# if [ "$hdmitiming" == "hdmi_timings=1920 1 52 208 260 240 1 6 10 6 0 0 0 60 0 38400000 1" ]; then
# vcgencmd hdmi_timings 1920 1 52 208 260 240 1 6 10 6 0 0 0 60 0 38400000 1
# tvservice -e "CEA 65 HDMI" & sleep 3
# fbset -depth 8 && fbset -depth 16
# fbset -g 1920 240 1920 240 16
#
# else
# ##Return to 480i # resolution to
# if [ "$hdmitiming" == "hdmi_timings=1920 1 113 192 175 480 1 6 3 16 0 0 2 60 1 38160000 1" ]; then
# vcgencmd hdmi_timings 1920 1 113 192 175 480 1 6 3 16 0 0 2 60 1 38160000 1
# # vcgencmd hdmi_timings 1920 1 48 192 240 480 1 6 3 16 0 0 2 60 1 37560000 1
# tvservice -e "CEA 65 HDMI" & sleep 3
# fbset -depth 8 && fbset -depth 16
# fbset -g 960 480 960 480 16
#
# else
# exit
# fi
# fi
# else
Re: Some game resolutions not supported by my monitor
I've worked out my issue. For some reason I had this:
So I had both hdmi_mode=6 and hdmi_mode=1 happening at the same time.hdmi_group=1
## Use only one mode at a time
# Boot and menus in 480i (rotated games in 480i, non rotated games in 240p/256p/288p)
hdmi_mode=6
# Boot and menus in 240p (all games in 240p/256p/288p)
#hdmi_mode=8
# Boot and menus in 480p (no res switching, just 480p)
hdmi_mode=1
Re: Some game resolutions not supported by my monitor
That's what I was trying to suggest was possibly it. Sorry I didn't make it clear which file I meant.
Glad you figured it out.
Glad you figured it out.