4P Adaptor Schematics? (coin wiring needed)

Installing ARpiCADE for the first time? Having issues? Check here first for solutions and tips on installing.

Moderator: dee2eR

Post Reply
DangerRoss
Community Member
Community Member
Posts: 2
Joined: Tue Apr 20, 2021 4:31 am

4P Adaptor Schematics? (coin wiring needed)

Post by DangerRoss » Fri Jun 24, 2022 6:23 pm

Hey there,

I have a Midway: NBA Maximum Hangtime cab where the previous owner had wired [coin 3 to coin 1] and [coin 4 to coin 2]. I can't seem to find the schematics on the Midway pinouts on the 4-player adaptor. My goal is to have each coin slot work for each player so I will need to wire up coin 3 & 4.

Notes: I'm running v_3.X.1 with 4p settings on.
Thanks!

DangerRoss
Community Member
Community Member
Posts: 2
Joined: Tue Apr 20, 2021 4:31 am

Re: 4P Adaptor Schematics? (coin wiring needed)

Post by DangerRoss » Fri Jun 24, 2022 7:46 pm

SOLVED: It turns out if you wire the coin mechs to the first Konami pin (left) on the 4p adaptor, they work great!

Coin 3 to pin 1, on player 3.
Coin 4 to pin 1, on player 4.

Glad it was an easy fix. It just took me a long time to figure out this was a solution.

dee2eR
Inventor
Inventor
Posts: 1857
Joined: Tue Aug 22, 2017 2:07 pm

Re: 4P Adaptor Schematics? (coin wiring needed)

Post by dee2eR » Sat Jun 25, 2022 6:39 am

Sorry I didn't reply faster, glad you worked it out.

The stock NBAJam 3 and 4 player coin connections should also work but there's no reason to change it if you have it working now.

Post Reply