ARpiCADE Forums

Hey there,

I have a Midway: NBA Maximum Hangtime cab where the previous owner had wired [coin 3 to coin 1] and [coin 4 to coin 2]. I can't seem to find the schematics on the Midway pinouts on the 4-player adaptor. My goal is to have each coin slot work for each player so I will need to wire up coin 3 & 4.

Notes: I'm running v_3.X.1 with 4p settings on.
Thanks!

SOLVED: It turns out if you wire the coin mechs to the first Konami pin (left) on the 4p adaptor, they work great!

Coin 3 to pin 1, on player 3.
Coin 4 to pin 1, on player 4.

Glad it was an easy fix. It just took me a long time to figure out this was a solution.

Sorry I didn't reply faster, glad you worked it out.

The stock NBAJam 3 and 4 player coin connections should also work but there's no reason to change it if you have it working now.