Hey there,
I have a Midway: NBA Maximum Hangtime cab where the previous owner had wired [coin 3 to coin 1] and [coin 4 to coin 2]. I can't seem to find the schematics on the Midway pinouts on the 4-player adaptor. My goal is to have each coin slot work for each player so I will need to wire up coin 3 & 4.
Notes: I'm running v_3.X.1 with 4p settings on.
Thanks!
4P Adaptor Schematics? (coin wiring needed)
Moderator: dee2eR
-
- Community Member
- Posts: 2
- Joined: Tue Apr 20, 2021 4:31 am
-
- Community Member
- Posts: 2
- Joined: Tue Apr 20, 2021 4:31 am
Re: 4P Adaptor Schematics? (coin wiring needed)
SOLVED: It turns out if you wire the coin mechs to the first Konami pin (left) on the 4p adaptor, they work great!
Coin 3 to pin 1, on player 3.
Coin 4 to pin 1, on player 4.
Glad it was an easy fix. It just took me a long time to figure out this was a solution.
Coin 3 to pin 1, on player 3.
Coin 4 to pin 1, on player 4.
Glad it was an easy fix. It just took me a long time to figure out this was a solution.
Re: 4P Adaptor Schematics? (coin wiring needed)
Sorry I didn't reply faster, glad you worked it out.
The stock NBAJam 3 and 4 player coin connections should also work but there's no reason to change it if you have it working now.
The stock NBAJam 3 and 4 player coin connections should also work but there's no reason to change it if you have it working now.