Hyperpie image on arpicade question
Moderator: dee2eR
-
- Community Member
- Posts: 22
- Joined: Tue Jan 30, 2018 1:12 pm
Hyperpie image on arpicade question
I was just wondering if I put an sd card with an hyperpie image on it, would the arpicade work on it?
Re: Hyperpie image on arpicade question
let's clear up some confusion....
ARpiCADE is the software that has been designed for a RaspberryJamma which is the hardware connecting the raspberry pi to a jamma compatible cabinet.
Hyperpie is a software designed for a rasperry pi using a hdmi connection.
Without a lot of customisation, you will find if you use the hyperpie image on a RaspberryJamma, you will not get a display on your screen due to the low resolution nature of a CRT cab.
If you're connecting a RaspberryJamma to an LCD screen, you'd have no need for a RaspberryJamma.
So to answer your question directly - I don't believe it will unless you modify a lot of the configuration files.
ARpiCADE is the software that has been designed for a RaspberryJamma which is the hardware connecting the raspberry pi to a jamma compatible cabinet.
Hyperpie is a software designed for a rasperry pi using a hdmi connection.
Without a lot of customisation, you will find if you use the hyperpie image on a RaspberryJamma, you will not get a display on your screen due to the low resolution nature of a CRT cab.
If you're connecting a RaspberryJamma to an LCD screen, you'd have no need for a RaspberryJamma.
So to answer your question directly - I don't believe it will unless you modify a lot of the configuration files.
Re: Hyperpie image on arpicade question
You could modify HyperPie to work on RaspberryJAMMA just by changing the Pis res to 480i (240p will probably not work well with Emulation Station). You would then need to set the controls up, no idea if the mk_arcade_joystick driver is already installed but it would need to be mapped to match your arcade controls, then you would need to map the emulators. I wouldn't really recommend doing this though as everything will be running in 480i.
It would be much easier to copy whatever you want out of the HyperPie image and use it with ARpiCADE. Should you prefer not to use ARpiCADE I would recommend the Recalbox modified for RaspberryJAMMA release Ouaibe did: https://arpicade.com/forums/viewtopic.php?f=12&t=541
There's also an old version of Retropie I modded to run at 480i with RaspberryJAMMA setup controls floating around somewhere but it's so old I wouldn't recommend it, actually I never really recommended it... lol
It would be much easier to copy whatever you want out of the HyperPie image and use it with ARpiCADE. Should you prefer not to use ARpiCADE I would recommend the Recalbox modified for RaspberryJAMMA release Ouaibe did: https://arpicade.com/forums/viewtopic.php?f=12&t=541
There's also an old version of Retropie I modded to run at 480i with RaspberryJAMMA setup controls floating around somewhere but it's so old I wouldn't recommend it, actually I never really recommended it... lol