controls/layout question
Moderator: dee2eR
controls/layout question
hello arpicaders i was thinking about doing a 2 player dual joystick set up for games like smash tv and total carnage on an upright cabinet, but with so many other fun games available, could one add buttons to that set up? in other words a functional 2 player control panel. 3 or 4 pushbuttons between the joysticks for a total of 4 joysticks and 6 to 8 pushbuttons, can that be wired up on a jamma? thanks
- cool_factor
- Legendary Contributor
- Posts: 333
- Joined: Tue Sep 26, 2017 10:55 am
- Location: Fort Worth TX
Re: controls/layout question
Using the 4 player adaptor would certainly work to add extra inputs, it has enough to have up to 4 joysticks, 4 starts, 4 coin mechs, 6 buttons for each player (for 2 players only 12 buttons per player) and some extra buttons too.
You could make a four player setup from the available JAMMA inputs only but there would only be enough buttons for start, coin, 2 action buttons (3 if you also use service and test) and 2 joysticks for each player.
With custom wiring you could reuse some inputs so each players second joystick was wired to 4 extra buttons as well as the stick. This would give you 2 joysticks per player when wanted or 6 buttons per player when wanted.
You could make a four player setup from the available JAMMA inputs only but there would only be enough buttons for start, coin, 2 action buttons (3 if you also use service and test) and 2 joysticks for each player.
With custom wiring you could reuse some inputs so each players second joystick was wired to 4 extra buttons as well as the stick. This would give you 2 joysticks per player when wanted or 6 buttons per player when wanted.
Re: controls/layout question
Awesome thank you